Filter
Top Products
IP POWER 9258 USER MANUAL
- 11 -
Power Supply State Query
Click the “ Set Power” button on the left, the page will be refreshed. The state of each
electric outlet will be displayed in column control.
System Settings of 9258
User can set the password, IP address, e-mail address, timer setting, online firmware
update, and the time of 9258 through the system settings.
1. Setting the password for IP Power 9258 :
Click the “ Change password “ button on the left you can enter the change password page.
The default password of 9258 is 12345678.
User can change it into any password (not longer than 8 bit), then click apply button to save
the change.
Note :
If forget the password , Use username " super user " when log in webpage
and then click "OK " turn power off for few second and then turn ON power . 9258
will to set back to default password.
( There is space between super and user. )
2. Setting the IP address for IP Power 9258:
Click the “ Setup “ button on the left side; fill in the proper IP address, Subnet Mask, Default
Gateway, DNS. If you choose to use DHCP, please make sure that your network support
DHCP service so the IP Power 9258 will search and gain an IP address automatically when
it starts.You can also control the Beeper sound .
VER. X.X,