Filter
Top Products
77
3
BIOS Setup
3.1.4.2 Onboard Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be identical
to this one.
USB Controller
Enabled Enables the onboard USB.
Disabled Disables the onboard USB.
USB 2.0 Controller
If you are using a USB 2.0 device, this field must be set to Enabled.
USB Keyboard Support
By default, this field is Disabled. However, if you are using a USB
keyboard under DOS, make sure to enable this function.
SATA Port
If the “PATA IDE Mode” field is set to Primary, this field will
show “P1, P3 is Secondary”; meaning SATA 2 and SATA 4 are
Secondary.
If the “PATA IDE Mode” field is set to Secondary, this field will
show “P0, P2 is Primary”; meaning SATA 1 and SATA 3 are
Primary.