Filter
Top Products
86
3
BIOS Setup
3.1.5.18 Time (hh:mm:ss) Alarm
This is used to set the time you would like the system to power-on.
If you want the system to power-on everyday as set in the “Date
(of Month) Alarm” field, the time set in this field must be later than
the time of the RTC set in the Standard CMOS Features submenu.
3.1.5.19 Reload Global Timer Events
When enabled, access to the specified field (Primary IDE 0/1,
Secondary IDE 0/1, FDD/COM/LPT Port or PCI PIRQ[A-D]#) will
cause the system to wake up completely from the power manage-
ment mode. When disabled, the system will not wake up from the
power management mode despite access to the specified field.