Filter
Top Products
G586SP/G586SP AIO
33
v Troubleshooting Checklist
If you experience difficulty with the system board, refer to
the checklist below. If you still cannot isolate the problem,
please contact your dealer.
1. Check the jumper settings to ensure that the jumpers are
properly set. If in doubt, refer to the “Board Configura-
tion” section.
2. Verify that all SIMMs are seated securely into the bank
sockets.
3. Make sure the SIMMs are in the correct locations.
4. Check that all populated memory banks are filled with
correctly sized SIMMs.
5. If your board fails to function, place the board on a flat
surface and seat all socketed components (gently press
each component into the socket).
6. If you made changes to the BIOS settings, reenter setup
and load the BIOS defaults.