Filter
Top Products
35
Application Development
In the debug interface type
The supported architectures can be displayed with the following command:
Choose the right architecture for your target.
Type "c" for continue.
You can now debug your application. Alternatively, you may try an external graphical
debugger like "ddd" or use "arm-linux-gdbtui" on the command line instead of
"arm-linux-gdb".
$ (gdb) set architecture ARCHITECTURE
$ (gdb) set solib-absolute-prefix <INSTALL_DIR>
$ (gdb) target remote TARGET.IP:2001
$ (gdb) set architecture
Requires an argument. Valid arguments are arm, armv2, armv2a, armv3,
armv3m, armv4, armv4t, armv5, armv5t, armv5te, xscale, ep9312, iwmmxt,
auto.
Valid
Argument
CC9C
CCXP270
UNC90
A9M2410
A9M2440
CC9P9360/9750
armv4 x x
armv5te x x
xscale x
When debugging with the BDI2000:
On the A9M9750DEV development board, set dip-switch S4-1 and S4-3 to "on"