Filter
Top Products
a. Loosen the screw on the single-slot
hub until it disengages.
b. With one hand holding the front of
the MAU, and your other hand
holding the single-slot hub,
carefully pull the two units apart.
When you install a MAU in a DEChub 900 MultiSwitch, you do not have to turn off the hub power.
Remove the single-slot hub (if necessary).
If you want to install a DEChub ONE MAU 900TL in a hub,
you need to remove the single-slot hub.
1
Install the MAU in the hub.
a. Align the MAU’s 48-pin connector
with any available 48-pin slot on the
hub.
b. Place the MAU’s bottom mounting
tab into the mounting slot on the hub.
c. Rock the MAU into place. You hear a
‘‘click” when the MAU is seated.
Installing a MAU in a DEChub 900 MultiSwitch
DECmau 900TL 5
2
The release lever is
lifted and clicks
back into place
as the module
is seated.
LKG–8139-93I
Mounting
tab