Filter
Top Products
18
Using the Configuration Menu
Home > WAN > PPPoE continued
Home > LAN
LAN is short for Local Area Network. This is considered your internal network. These
are the IP settings of the LAN interface for the DI-754. These settings may be referred
to as Private settings. You may change the LAN IP address if needed. The LAN IP
address is private to your internal network and cannot be seen on the Internet.
Apply-
click Apply to save the changes.
Auto-reconnect-
if enabled, the DI-754 will automatically connect to your ISP
after your system is restarted or if the connection is dropped.
MTU-
Maximum Transmission Unit-1492 is default-you may need to
change the MTU to conform with your ISP.
Maximum
Idle Time-
enter a maximum idle time during which internet connection is
maintained during inactivity. To disable this feature, enter zero
or enable Auto-reconnect.
Secondary
DNS Address-
optional
Primary
DNS Address-
get this info from your ISP
Apply-
click Apply to save the changes.
Local
optional
Subnet Mask-
the subnet mask of the LAN interface.
The default subnet mask is 255.255.255.0
IP Address-
the IP address of the LAN interface. The default IP address is:
192.168.0.1
DI-754