Filter
Top Products
30
Using the Configuration Menu
Advanced > Performance > 802.11a
Wireless
Performance-
select 802.11a or 802.11b+. Here, 802.11a has been
chosen. This screen displays the wireless performance
features of the Access Point portion of the DI-754.
Shared Key -
in this mode, in order to access the DI-754 on the network, the
device must be listed in the MAC Address Control List
Apply- click Apply to save the changes
Open System -
the DI-754 will be visible to all devices on the network. This is
the default setting
Authentication-
select Open system or Shared Key
DTIM interval-
(Delivery Traffic Indication Message) 1 is the default setting. A
DTIM is a countdown informing clients of the next window for
listening to broadcast and multicast messages.
Fragmentation-
this value should also remain at its default setting of 2346
RTS Threshold-
this value should remain at its default setting of 2346. If incon-
sistent data flow is a problem, only a minor modification should
be made.
Beacon interval-
beacons are packets sent by an Access Point to synchronize a
wireless network. Specify a value. 100 is the default setting
and is recommended.
Data Rate-
best is the default selection
Transmit Power-
full is the default selection.