Filter
Top Products
36
Using the Configuration Menu
Tools > Misc
Ping Test-
Restart Device-
Block WAN Ping-
Discard Ping
from WAN side-
VPN
Pass Through-
PPTP-
select Enabled or Disabled
IPSec- select Enabled or Disabled
Apply-
the Ping Test is used to send Ping packets to test if a computer
is on the Internet. Enter the IP Address that you wish to Ping,
and click Ping
if you choose to block WAN Ping, the WAN IP Address of the
DI-754 will not respond to pings. Blocking the Ping may provide
some extra security from hackers.
the DI-754 supports VPN (Virtual Private Network) pass-through
for both PPTP (Point-to-Point Tunneling Protocol) and IPSec
(IP Security). Once VPN pass-through is enabled, there is no
need to open up virtual services. Multiple VPN connections
can be made through the DI-754. This is useful when you have
many VPN clients on the LAN network.
click Reboot to restart the DI-754
click Enabled to block the WAN ping
click Apply to save changes