Filter
Top Products
20D-Link DHP-W310AV User Manual
Section 3 - Conguration
This section will show you how to congure your new D-Link Powerline AV using the web-based conguration utility.
PLC Settings
Power Saving:
Network
Name:
Public
Network
Name:
Private
Network
Name:
Scan:
Member List:
QoS Setting:
MAC Address/
Port Number:
Power save mode.
You can set the name of your network and to make
it either public or private. Make sure the Network
Name of all of the devices within your Powerline
network is the same.
Select this option if you would like to make
your Powerline network public with the default
Network Name of “HomePlugAV”. Since this is a
commonly used Network Name, it is less secure
than a private Network Name.
Select this option if you wish to make your
Powerline network more secure by using a private
Network Name.
Click this button to scan for new Powerline devices.
This is automatically done periodically and upon
loading this page.
This section provides information on the Powerline
AV devices on your Powerline network.
Here you can set the Quality of Service (QoS)
settings for each network device. QoS helps you
prioritize network trac based on device or the
port the trac is on.
Select a device from the Computer Name dropdown box and then click the << above Computer Name to automatically ll in
the device’s MAC Address. Or, Set the priority for the device under the Priority dropdown box. Clear settings for a rule with the
Clear button. Remember to click Save Settings after making changes.