D-Link DGE-530T Network Card User Manual


 
DGE-530T Gigabit Ethernet Adapter Card
Supports Wake-on-LAN
Full-duplex Gigabit Ethernet interface that delivers 2Gbps aggregate bandwidth
Support for half and full duplex at 10Mbps, half and full-duplex at 100Mbps, and full-duplex
operation at 1000Mbps
Support for full-duplex double network throughput
Support TCP/IP checksum generation and verification
Support for SNMP V1
Support for 802.3x flow control
Supports 802.1Q VLAN
Supports 802.1p Priority Tags
Supports a Cable Diagnostic Feature
Support for ACPI 2.0
One built-in RJ-45 connector
Auto-negotiation to the highest available speed
Four LED indicators: Link/Activity, Full Duplex, 1000Mbps, 100Mbps.
Low profile bracket
PCB size: 124mm x 51mm
Driver
support for:
Microsoft Windows Server 2003 Red Hat Linux 7.3 (kernel 2.4.18-3) or later
Microsoft Windows XP Microsoft Windows 2000
Microsoft Windows NT Microsoft Windows 98SE
Microsoft Windows ME Novell Netware 4.2/5.X/6.X/ ODI 1.11
NOTE: The driver for Microsoft Windows Server 2003 will be available in
an upcoming release of this product. Currently this driver is not supported.
Check http://www.dlink.com for newest release of drivers.
2