Filter
Top Products
DI-308 ISDN Remote Router
103
path defined in the above Boot File Name. Please ensure that the path and file
name of the image file is listed in the configuration file. If set to
No
, the update
procedure will try to find an image file at the Boot File Name path. Please see
Appendix F, “
Configuration File”
for more information about configuration files.
After the parameters are set in the
Software Update
screen, SAVE the changes,
EXIT, and perform a System Reset or Execute Bootload to begin the software
download process.
After the new runtime software has been downloaded, the router will automatically
start up using the new software--make sure the Software Update Control is set to
Disable
to avoid a downloading loop.
EEPROM Factory Reset
Performing a factory reset erases all settings and tables. All configuration changes
ever made to the router will be deleted. The router will be set to the factory defaults
it was shipped with and will no longer have an IP address.
Please make sure you wish to wipe out all settings and configure the router from
scratch before you perform a factory reset.
Execute Bootload
Choosing this option accepts the changes made in the PROM program and begins
the router’s startup sequence.
Executing a bootload can also begin the Software Update procedure, if enabled.