![](http://pdfasset.owneriq.net/8/18/818f3d34-acf3-41c6-92b4-421770e0b558/818f3d34-acf3-41c6-92b4-421770e0b558-bg62.png)
DI-308 ISDN Remote Router
90
•
IP Address –
This is the IP Address of the device that the router will attempt to
reach. The router will check its routing table and try to locate the IP Address.
•
Count –
The number of pings (packets) that will be sent. A value of 0 will cause
pings to be sent continuously.
•
Delay (10ms) –
The amount of time in 10 millisecond intervals between each
ping in the Count.
•
Start Ping Test -
Press <Enter> or <Return> to begin the test.
Loopback Test
The loopback test is used to test the path ISDN network between your phone
company’s switch and the router.