Filter
Top Products
30
browse the built-in web pages to perform “Administrator” tasks. This feature
enables you to perform “Administrator” tasks from the remote (Internet) host.
IP Address: Internet IP address of the computer that has access to the
Broadband Router. It is not recommended that you set the IP address to
* (star), because this allows any Internet IP address to access the
Broadband Router, which could result in a loss of security for your
network. If you elect to enable Remote Management, enter the IP Address
of your remote location.
Port: Select the port number used to access the Broadband Router.
Example: http://x.x.x.x:8080
whereas x.x.x.x is the WAN IP address of the
Broadband Router and 8080 is the port used for the Web-Management
interface.
Time
The system time is the time
used by the DI-514 for
scheduling services. You can
manually set the time or connect
to a NTP (Network Time
Protocol) server. If an NTP
server is set, you will only need
to set the time zone. If you
manually set the time, you may
also set Daylight Saving dates
and the system time will
automatically adjust on those dates.
System Settings
The current system settings can
be saved as a file onto the local
hard drive. The saved file or any
other saved setting file can be
loaded back on the Broadband
Router. To reload a system
settings file, click on Browse to
browse the local hard drive and
locate the system file to be used.
You may also reset the
Broadband Router back to
factory settings by clicking on
Restore.
Tools > Time
Tools> System
Month