Filter
Top Products
Using the Configuration Wizard
The DI-604 provides Web based configuration. You can configure your
DI-604 through your Netscape Communicator or Internet Explorer
browser in MS Windows, Macintosh or UNIX based platforms.
Activate your browser. Then type the IP address of the DI-604 into the
Location (for Netscape) or Address (for IE) field and press “Enter.” For
example: http://192.168.0.1.
(The IP Address shown in the example above is the default setting. If you have changed the
IP Address of the DI-604 to conform to a network, then input that IP Address in the web
browser, instead of the default IP Address shown.)
This screen will appear.
Click Run Wizard.
The Setup Wizard screen
will appear. Follow the
Wizard step by step to
quickly configure the
DI-604.
Click Next
•
Open the web browser
•
Type in the IP Address of
the DI-604
•
Type admin in the User Name field
(lower case)
•
Leave the Password blank
•
Click OK
http://192.168.0.1
admin