Filter
Top Products
10
Wireless Basics
Installation Considerations
Designed to go up to 328 feet (100 meters) indoors, D-Link AirPro DWL-
6000AP lets you access your network, using a wireless connection, from
virtually anywhere. Keep in mind, however, that the number, thickness and
location of walls, ceilings or other objects that the wireless signals must pass
through may limit the range. Typical ranges vary depending on the types of
materials and background RF (radio frequency) noise in your home or
business. The key to maximizing wireless range is to follow these basic
guidelines:
1.
Keep the number of walls and ceilings between the DWL-6000AP and
your receiving device (e.g., the DWL-A650) to a minimum - each wall or
ceiling can reduce your D-Link AirPro Wireless product’s range from 3-90
feet (1-30 meters.) Position your Access Points, Residential Gateways,
and computers so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between Access Points, Residential Gateways
(routers) and computers. A wall that is 1.5 feet thick (.5 meters), at a 45-
degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree
angle it looks over 42 feet (14 meters) thick! Try to make sure that the
Access Points and adapters are positioned so that the signal will travel
straight through a wall or ceiling for better reception.
3. Building Materials make a difference - a solid metal door or aluminum
studs may have a negative effect on range. Try to position Access Points,
and computers with wireless adapters so that the signal passes through
drywall or open doorways and not other materials.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical
devices or appliances that generate RF noise.
For the average home or office, signal range should not be an issue. If you
experience low or no signal strength in areas of your home or office that you
wish to access, consider positioning the Access Point in a location directly
between the computers with wireless adapters. Additional Access Points
can be connected to provide better coverage in rooms or offices where the
signal does not appear as strong as desired.