Filter
Top Products
15
255.255.255.0
Using the Configuration Menu
Home > Wireless (continued)
Wireless Band: Choose 802.11a or 802.11b. In the illustration shown,
802.11a is selected .
SSID: (Service Set Identifier) “default” is the default setting for both
802.11a and 802.11b. The SSID is a unique name that identifies a network.
All devices on a network must share the same SSID name in order to
communicate on the network. If you choose to change the SSID from the
default setting, input your new SSID name in this field. The SSID can be up to
32 characters in length.
SSID Broadcast: “enable” is the default setting. The SSID Broadcast
“broadcasts” the SSID over the network, making connection easier, although
you may choose to disable this feature.
Channel: Channel 36 is the default channel for 802.11a. Channel 6 is
the default channel for 802.11b. Select a different channel if you want to
change the default setting. All devices on the network must be set to the
same channel to communicate on the network. (Current wireless network
adapters will automatically scan for the channel to establish connection with
the access point.)
Radio Frequency: the radio frequency (which corresponds to the wireless
band selected) appears in this “read-only” field.
Click Help at any time for more information.
Click Apply if you have made any changes or additions.
This window displays the default settings of the DWL-6000AP. The default IP
Address is 192.168.0.50. If you select Dynamic IP Address, you will obtain
a dynamic IP Address from a DHCP server on your network.
(Note: you will need to use the AP Manager to determine the IP Address
dynamically assigned to the Access Point.)
The Subnet Mask is 255.255.255.0. Input the IP Address of the Default
Gateway (the router on your network.)
Click Apply if you have made any changes.