Filter
Top Products
54
2. The wireless client cannot access the Internet in the
Infrastructure mode.
Make sure the wireless client is associated and joined with the correct Access
Point. To check this connection: Right-click on the Local Area Connection icon
in the taskbar> select View Available Wireless Networks. The Connect to
Wireless Network screen will appear. Please make sure you have selected the
correct available network, as shown in the illustrations below.
Troubleshooting
• Check that the IP Address assigned to the wireless adapter is within the same
IP Address range as the access point and gateway. (Since the DWL-6000AP
has an IP Address of 192.168.0.50, wireless adapters must have an IP Address in
the same range, e.g., 192.168.0.x. Each device must have a unique IP Address;
no two devices may have the same IP Address. The subnet mask must be the
same for all the computers on the network.) To check the IP Address assigned to
the wireless adapter, double-click on the Local Area Connection icon in the
taskbar > select the Support tab and the IP Address will be displayed. (Please
refer to Checking the IP Address in the Networking Basics section of this
manual.)
• If it is necessary to assign a Static IP Address to the wireless adapter, please
refer to the appropriate section in Networking Basics. If you are entering a DNS
Server address you must also enter the Default Gateway Address. (Remember
that if you have a DHCP-capable router, you will not need to assign a Static IP
Address. See Networking Basics: Assigning a Static IP Address.)
default