Filter
Top Products
18D-Link DAP-1350 User Manual
Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link wireless access point using the web-based configuration
utility.
Access Point Mode
If you wish to change the default settings or optimize
the performance of the DAP-1350, you may use the
web-based configuration utility.
To access the configuration utility, open a web browser
such as Internet Explorer and enter dlinkap or
192.168.0.50 in the address field.
Type admin and then enter your password. Leave the
password blank by default..
If you get a Page Cannot be Displayed error, please
refer to the Troubleshooting section for assistance.
Change the mode selector to AP on the device. Connect an Ethernet cable from the Ethernet port on the DAP-1350
to a computer for configuration.