Filter
Top Products
93D-Link DAP-1350 User Manual
Section 3 - Configuration
Enter a new password for the Administrator Login Name.
The administrator can make changes to the settings.
Enter the new password for the User login. If you login
as the User, you can only see the settings, but cannot
change them.
Enter a name for the DAP-1350 router.
Enables a challenge-response test to require users to type
letters or numbers from a distorted image displayed on the
screen to prevent online hackers and unauthorized users
from gaining access to your router’s network settings.
Check to enable HTTPS to connect to the router
securely.
Remote management allows the DAP-1350 to be
configured from the Internet by a web browser. A
username and password is still required to access the
Web-Management interface. In general, only a member of
your network can browse the built-in web pages to perform
Administrator tasks. This feature enables you to perform
Administrator tasks from the remote (Internet) host.
The port number used to access the DAP-1350.
Admin Password:
User Password:
Gateway Name:
Enable Graphical
Authentication:
Enable HTTPS
Server:
Remote
Management:
Remote Admin
Port:
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are two accounts that can access the management interface through the web browser. The accounts are admin
and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to change both admin and user account passwords.