Filter
Top Products
30D-Link DAP-1350 User Manual
Section 3 - Configuration
LAN Connection Type:
IP Address:
Subnet Mask:
Default Gateway:
Device Name:
Select Static IP from the drop-down menu.
Enter the IP address of the access point. The
default IP address is 192.168.0.50. If you
change the IP address, once you click Apply,
you will need to enter the new IP address in
your browser to get back into the conguration
utility.
Enter the Subnet Mask.
Enter the Gateway. This is usually the LAN or
internal IP address of your router.
Enter the Device Name of the AP. It is
recommended to change the Device Name if
there is more than one D-Link device within
the subnet. You can enter the device name
of the AP into your web browser to access
the instead of IP address for conguration.
If you are using the device name to connect,
make sure that your PC and your DAP-1350
are on the same network.
Static IP
Select Static IP to manually enter the IP address, subnet mask, and default gateway addresses.