Filter
Top Products
93D-Link DAP-1350 User Manual
Section 3 - Configuration
This Wizard helps you add wireless devices to the wireless network.
The wizard will either display the wireless network settings to guide you through manual conguration, prompt you to enter the
PIN for the device, or ask you to press the conguration button on the device. If the device supports Wi-Fi Protected Setup
and has a conguration button, you can add it to the network by pressing the conguration button on the device and then
the on the router within 60 seconds. The status LED on the router will ash three times if the device has been successfully
added to the network.
There are several ways to add a wireless device to your network. A “registrar” controls access to the wireless network. A
registrar only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected
Setup button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as
well.
Start the wizard.
Add Wireless
Station:
Add Wireless
Device Wizard: