Filter
Top Products
21D-Link DAP-2360 User Manual
Section 3 - Conguration
WDS mode
In WDS mode, the DAP-2360 wirelessly connects multiple networks, without functioning as a wireless AP.
WDS is selected from the drop-down menu.
Service Set Identifier (SSID) is the name
designated for a specic wireless local area
network (WLAN). The SSID’s factory default
setting is dlink. The SSID can be easily changed
to connect to an existing wireless network or to
establish a new wireless network.
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Enabling this feature automatically selects
the channel that will provide the best wireless
performance. This feature is not supported in
WDS mode.
All devices on the network must share the
same channel. To change the channel, use the
drop-down menu to make the desired selection.
Use the drop-down menu to choose 20 MHz or
Auto 20/40 MHz.
Enter the MAC addresses of the APs on your
network that will serve as bridges to wirelessly
connect multiple networks.
Mode:
Network
Name (SSID):
SSID
Visibility:
Auto Channel
Selection:
Channel:
Channel
Width:
Remote
AP MAC
Address:
Wireless Band: Select 2.4GHz from the drop-down menu.