Filter
Top Products
73D-Link DAP-2360 User Manual
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps
below:
Step 1
Windows
®
2000: Click on Start > Settings > Control Panel > Network Connections
Windows
®
XP: Click on Start > Control Panel > Network Connections
Windows Vista
®
: Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage
network connections
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the
LAN IP address on your router.
Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number
between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the
same as the LAN IP address of your router (192.168.0.1).