Filter
Top Products
33
When you select Port VLAN setting, fill in each port’s PVID value
between 1 and 4094, Priority value between 0 and 7.
Figure 19.
Trunk Setting
The Trunk function enables the Switch to connect two devices using
multiple ports, increasing the bandwidth up to 4 times that of a single
port (800Mbps in full-duplex mode).
There are 3 selections for the trunk setting, ports “09,10”, ports
“09,10,11,12” or select “disable” for closing this function.
Figure 20. Trunk Settings
Be sure that the selected trunk ports are connected to a device with the
same VLAN group.