D-Link DES-5024 Network Card User Manual


 
Fast Ethernet Switching System User’s Guide
Introduction
4
Front Panel
The DES-5024 is designed for management at a glance. The front of the DES-5024,
displayed in Figure 1, has LEDs that give you essential information at a glance.
The DES-5024 is a modular unit. The chassis has five slots. All the modules have LEDs.
See Chapter 4, LEDs, for information on interpreting the LEDs. The slots are in the
following order: CPU module is always on top. Slots one and two are full sized and cme
with two 12-Port 10/100-TX Modules. Slots three and four are half sized and only slot 3
can accommodate feature modules. Slot 4 may not be used.
All ports can be used for network connections. The RS-232 port is used for Out of Band
Management.
All LEDs are located on the front panel of the DES-5024. Their purpose is to allow you
to monitor the operation and performance of the DES-5024 at a glance.
Figure 1: DES-5024 Front Panel
Slot 1
CPU Module
RS-232 Port
Slot 2
Slot 3
MDI-X Ports
Slot 4
Fiber Optic Ports
4
4