Filter
Top Products
D-Link DFE-855 Fast Ethernet Converter
NOTE: A qualified electrician must perform all connections
to DC power and to safety grounds. All electrical wiring
must comply with applicable local or national codes and
practices.
CAUTION: Never defeat the ground conductor or operate
the equipment in the absence of a suitably installed ground
conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable
grounding is available.
CAUTION: The system chassis must be positively
grounded to the rack cabinet frame. Do not attempt to
connect power to the system until grounding cables are
connected. Completed power and safety ground wiring
must be inspected by a qualified electrical inspector. An
energy hazard will exist if the safety ground cable is omitted
or disconnected.
Protecting Against Electrostatic Discharge
Static electricity can harm delicate components inside your system. To
prevent static damage, discharge static electricity from your body before
you touch any of the electronic components, such as the microprocessor.
You can do so by periodically touching an unpainted metal surface on the
chassis.
You can also take the following steps to prevent damage from ESD
(Electrostatic Discharge):
vi
•
•
When unpacking a static-sensitive component from its shipping
carton, do not remove the component from the antistatic packing
material until you are ready to install the component in your
system. Just before unwrapping the antistatic packaging, be sure
to discharge static electricity from your body.
When transporting a sensitive component, first place it in an