Filter
Top Products
10
If you want to use the built-in
DHCP Server in the DFL-200,
choose Enable DHCP Server
in this screen. You then need to
specify a range of IP addresses
to hand out to the DHCP clients.
This range is entered in the
format “Start IP – Stop IP” i.e.
192.168.1.100 – 192.168.1.200.
If you don’t want to use the built-
in DHCP Server or confi gure
it later, choose Disable DHCP
Server and click Next when
done.
The Setup Wizard
(continued)
Click
Next
Step 4 - Set up built-in DHCP
server
Click
Next
Step 5 - Confi gure helper
servers
NTP Servers
- If enabled,
specify which NTP Servers
that should be used to
syncronize the fi rewall time
against.
Syslog Servers
– If enabled,
specify where the fi rewall
should log, you can specify
up to two Syslog receivers.
192.168.1.100-192.168.1.200
192.168.1.100-192.168.1.200
192.168.1.100-192.168.1.200