Filter
Top Products
3
POWER LED – a solid light
indicates a proper connection
to the power supply.
NETWORK LEDs – a solid light on
the port indicates a connection to an
Ethernet enabled computer. These
LEDs blinks during data transmission.
Restart your computer
To obtain a new IP address from the DFL-200 you wll need
to restart your computer. Make sure that the network adapter
in your computer is confi gured properly fi rst. Instructions on
how to confi gure the network adapter to obtain an IP address
automatically from the DFL-200 can be found in the appendix.
STATUS LED – will fl ash
consistently to indicate that the
DFL-200 is working properly.