Filter
Top Products
D-Link DGS-1016D/DGS-1024D Unmanaged Gigabit Ethernet Switch
9
•
•
•
•
•
•
The power outlet should be within 1.82 meters (6 feet) of the
Switch.
Visually inspect the power cord and see that it is fully secured to
the AC power port.
Make sure that there is adequate space for proper heat dissipation
from and adequate ventilation around the Switch. Leave at least
10 cm (4 inches) of space at the front and rear of the Switch for
ventilation.
Install the Switch in a fairly cool and dry place for the acceptable
temperature and humidity operating ranges.
Install the Switch in a site free from strong electromagnetic field
generators (such as motors), vibration, dust, and direct exposure
to sunlight.
When installing the Switch on a level surface, attach the rubber
feet to the bottom of the device. The rubber feet cushion the
Switch, protect the casing from scratches and prevent it from
scratching other surfaces.
Mounting the Switch on a Rack
The DGS-1016D/1024D can easily be mounted on a rack. Two mounting
ears are provided for this purpose. Make sure that the front panel is
exposed in order to view the LEDs. Please refer to the following
illustrations:
Figure 2-1. Mounting the Switch to a Rack