Filter
Top Products
D-Link DGS-1016D/DGS-1024D Unmanaged Gigabit Ethernet Switch
12
Section 3
Connecting The Switch
Switch To End Node
Switch To Hub or Switch
Connecting To a Server
NOTE: All 16/24 high-performance NWay Ethernet ports
can support both MDI-II and MDI-X connections.
Switch To End Node
End nodes include PCs outfitted with a 10, 100 or 1000 Mbps RJ-45
Ethernet/Fast Ethernet Network Interface Card (NIC) and most routers.
An end node can be connected to the Switch via a twisted-pair Category 3,
4, or 5 UTP/STP cable. The end node can be connected to any of the ports
of the Switch.
Figure 3-1. Switch connected to an end node