Filter
Top Products
D-Link DGS-1016D/DGS-1024D Unmanaged Gigabit Ethernet Switch
10
A.
B.
.
Attach the ears to each side of the Switch, using the screw-holes
located on the side of the device.
Firmly attach the ears to the rack as shown. Please follow the
usual safety precautions for rack-mountable products
Attaching the Rubber Feet
Use rubber feet provided. Position and apply rubber feet to the
underside of the DGS-1016D/1024D Switch
Figure 2-2. Attaching the Rubber Feet
Provide for Adequate Ventilation
CAUTION: Do not place any device on top of Switch, or
place the Switch on top of any device or object that will
block the free flow of air through the ventilation slots on
the sides, top, and bottom of the Switch’s case. In addition,
care should be taken not to locate the Switch next to, on top
of, or underneath any device that generates a significant
amount of heat. For the Switch to perform at its optimal
level, the Switch must have adequate ventilation to prevent
the Switch from overheating and becoming damaged.