Filter
Top Products
D-Link DGS-1024T Unmanaged Gigabit Ethernet Switch
Mounting the Switch in a standard 19” rack.
Figure 2- 3. Installing Switch in a rack
Power On
Plug one end of the AC power cord into the power connector of the Switch and the other end into the local power
source outlet.
After the Switch is powered on, the LED indicators will momentarily blink. This blinking of the LED indicators
means the system is resetting.
Power Failure
As a precaution, in the event of a power failure, unplug the Switch. When power is resumed, plug the Switch
back in.
14