Filter
Top Products
Software Installation 35
copy <tftp://
<ipaddress>/
<filepath>/
<filename>>
nvram:startup-
config
Privileged
EXEC
Sets the destination (download) datatype to be an image
(system:image) or a configuration file (nvram:startup-con-
fig).
The URL must be specified as:
xmodem:<filepath>/<filename>
For example:
If the user is using Hyper Terminal, the user must specify
which file is to be sent to the networking device.
The Networking Device restarts automatically once the
code has been downloaded.
copy
<tftp://
<ipaddress>/
<filepath>/
<filename>>
sys-
tem:image
Privileged
EXEC
Sets the destination (download) datatype to be an image
(system:image) or a configuration file (nvram:startup-con-
fig).
The URL must be specified as:
xmodem:<filepath>/<filename>
copy
<tftp://
<ipaddress>/
<filepath>/
<filename>>
nvram:startup-
config
Privileged
EXEC
Sets the destination (download) datatype to be a configu-
ration file.
The URL must be specified as:
tftp://<ipaddress>/<filepath>/<filename>
Before starting a TFTP server download, you must config-
ure the IP address.
copy
<tftp://
<ipaddress>/
<filepath>/
<filename>>
sys-
tem:image
Privileged
EXEC
Sets the destination (download) datatype to be an image.
The URL must be specified as:
tftp://<ipaddress>/<filepath>/<filename>
The system:image option downloads the code file.
clear config Privileged
EXEC
Enter yes when the prompt pops up to clear all the config-
urations made to the networking device.
copy sys-
tem:running-
config
nvram:startup-
config
Privileged
EXEC
Enter yes when the prompt pops up that asks if you want
to save the configurations made to the networking device.
reload (or cold boot
the networking
device)
Privileged
EXEC
Enter yes when the prompt pops up that asks if you want
to reset the system.
You can reset the networking device or cold boot the net-
working device, both work effectively.
Table 5. Quick Start Commands
Command Mode Description