D-Link DSL-300T Network Card User Manual


 
DSL-300T ADSL Modem Users Guide
18
Setup
The Setup window offers links to menus to configure settings for the LAN (Local Area Network) and for the
WAN (Wide Area Network) setup. The first menu you see when clicking the Setup tab is the Modem Setup
menu.
All the information you need to make the changes needed for a functioning WAN connection should have been
provided to you by your ISP or network service provider. One of the settings you may be asked to change is the
Modulation type used for the ADSL connection. The Modem Setup menu is used to change the type of
modulation used for the WAN connection.
Figure 3-3. Modem Setup menu
If you know what Modulation type is used for your service, select the desired modulation type and then click
Apply. The modulation types available are T1413, G.DMT, GLITE and MMODE. By default the Modem uses
MMODE.
Now you are ready to configure the remaining settings needed for the WAN connection. Click the Connection
button to configure the other WAN settings.