Filter
Top Products
Unified Services Router User Manual
50
Maximum Idle Time field. This feature is useful if your ISP charges you
based on the amount of time that you are connected.
Password: Enter the password required to login to the ISP.
Dial Number: Enter the number to dial to the ISP.
Authentication Protocol: Select one of None, PAP or CHAP Authentication
Protocols to connect to the ISP.
APN: Enter the APN (Access Point Name) provided by the ISP.
Domain Name System (DNS) Servers
Domain name servers (DNS) convert Internet names such as www.dlink.com, to
IP addresses to route traffic to the correct resources on the Internet. If you
configure your router to get an IP address dynamically from the ISP, then you
need to specify the DNS server source in this section.
DNS Server Source: Choose one of the following options:
o Get Dynamically from ISP: Choose this option if your ISP did not assign
a static DNS IP address.
o Use These DNS Servers: Choose this option if your ISP assigned a static
DNS IP address for you to use. Also complete the fields that are
highlighted white in this section.
o Primary DNS Server: Enter a valid primary DNS Server IP Address.
o Secondary DNS Server: Enter a valid secondary DNS Server IP Address.
Configurable Port: This page allows you to assign the functionality intended for
the Configurable Port. Choose from the following options:
o WAN: If this option is selected, configure the WAN3. The WAN Mode
options are now available as there are two WAN ports for the gateway.
o DMZ: If this option is selected, you are able to configure the DMZ port
on the DMZ Configuration menu.
Click Save Settings to save your changes.
Click Don't Save Settings to revert to the previous settings.