Filter
Top Products
15
Using the Configuration Utility (continued)
Tools > Admin
New Password: Enter the
new password.
Confirm Password:
Re-enter the password to
confirm it.
Tools > System
Save Settings: The current
system settings can be saved
as a file onto the local hard
drive.
Load Settings: The saved file
or any other saved setting file
can be loaded back on the access
point. To reload a system settings
file, click on Browse to browse
the local hard drive and locate
the system file to be used. Click
Load when you have selected
the file to be loaded back onto
the access point.
Restore: You may also reset
the DWL-G700AP back to factory settings by clicking on Restore. Make sure to save
the unit’s settings before clicking on Restore. You will lose your current settings when
you click Restore.