Filter
Top Products
55D-Link DIR-835 User Manual
Section 3 - Conguration
QoS Engine
This option is disabled by default. Enable this option for
better performance and experience with online games and
other interactive applications, such as VoIP.
This option is enabled by default when the QoS Engine
option is enabled. This option will allow your router to
automatically determine the uplink speed of your Internet
connection.
This displays the detected uplink speed.
The speed at which data can be transferred from the router
to your ISP. This is determined by your ISP. ISP’s often speed
as a download/upload pair. For example, 1.5Mbits/284Kbits.
Using this example, you would enter 284. Alternatively you
can test your uplink speed with a service such as www.
dslreports.com.
By default, the router automatically determines whether
the underlying connection is an xDSL/Frame-relay network
or some other connection type (such as cable modem or
Ethernet), and it displays the result as Detected xDSL or
Frame Relay Network. If you have an unusual network connection in which you are actually connected via xDSL but for which you
congure either “Static” or “DHCP” in the Internet settings, setting this option to xDSL or Other Frame Relay Network ensures that
the router will recognize that it needs to shape trac slightly dierently in order to give the best performance. Choosing xDSL or
Other Frame Relay Network causes the measured uplink speed to be reported slightly lower than before on such connections, but
gives much better results.
When Connection Type is set to automatic, the automatically detected connection type is displayed here.
This option is disabled by default. Enable this option for better performance and experience with online games and other interactive
applications, such as VoIP.
Enable Trac
Shaping:
Automatic Uplink
Speed:
Measured Uplink
Speed:
Manual Uplink
Speed:
Connection Type:
Detected Network
Type:
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are
disabled and application priority is not classied automatically.