Filter
Top Products
32D-Link DAP-1353 User Manual
Section 3 - Configuration
System
Use this option to save the current
access point conguration settings
to a le on the hard disk of the
computer you are using. First, click
the Save button. You will then see
a le dialog, where you can select
a location and le name for the
settings.
Use this option to load previously
saved access point conguration
settings. First, click the Browse
control to nd a previously saved
le of conguration settings. Then,
click the Load button to transfer
those settings to the access point.
This option will restore a ll
conguration settings back to the settings that were in effect at the time the access point was shipped from the factory. Any
settings that have not been saved will be lost, including any rules that you have created. If you want to save the current
access point conguration settings, click the Save button above.
Reboots the DAP-1353.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to Factory
Default Settings:
Reboot: