Filter
Top Products
-5-
Technology Introduction
Introduction to Broadband Router Technology
A router is a device that forwards data packets from a source to a
destination. Routers forward data packets using IP addresses and not a
MAC address. A router will forward data from the Internet to a particular
computer on your LAN.
The information that makes up the Internet gets moved around using
routers. When you click on a link on a web page, you send a request to a
server to show you the next page. The information that is sent and
received from your computer is moved from your computer to the server
using routers. A router also determines the best route that your
information should follow to ensure that the information is delivered
properly.
A router controls the amount of data that is sent through your network by
eliminating information that should not be there. This provides security for
the computers connected to your router, because computers from the
outside cannot access or send information directly to any computer on
your network. The router determines which computer the information
should be forwarded to and sends it. If the information is not intended for
any computer on your network, the data is discarded. This keeps any
unwanted or harmful information from accessing or damaging your
network.
Introduction to Firewalls
A firewall is a device that sits between your computer and the Internet that
prevents unauthorized access to or from your network. A firewall can be a
computer using firewall software or a special piece of hardware built
specifically to act as a firewall. In most circumstances, a firewall is used to
prevent unauthorized Internet users from accessing private networks or
corporate LAN’s and Intranets.
A firewall watches all of the information moving to and from your network
and analyzes each piece of data. Each piece of data is checked against a
set of criteria that the administrator configures. If any data does not meet
the criteria, that data is blocked and discarded. If the data meets
the
criteria, the data is passed through. This method is called packet filtering.
A firewall can also run specific security functions based on the type of
application or type of port that is being used. For example, a firewall can
be
configured to work with an FTP or Telnet server. Or a firewall can be
configured to work with specific UDP or TCP ports to allow certain
applications or games to work properly over the Internet.