Filter
Top Products
16
Using the Configuration Menu (continued)
Home > WAN > PPPoE
IP Address-
This option is only available for Static PPPoE. Enter the static IP
Address for the PPPoE connection.
(Continued on the next page)
User Name-
Your PPPoE username provided by your Service Provider.
Service Name- Enter the Service Name provided by your Service Provider
(optional).
Retype Password-
Re-enter the PPPoE password
PPPoE-
Static PPPoE-you have an assigned (static) IP Address.
Choose this option if your Service Provider uses PPPoE.
Dynamic PPPoE- receive an IP Address automatically from your ISP.
Primary DNS
Address-
Primary DNS IP address provided by our ISP
Secondary DNS
Address-
This option is only available for Static PPPoE. Enter the static IP
Address for the PPPoE connection.
Choose PPPoE (Point
to Point Protocol over
Ethernet) if your ISP
uses a PPPoE con-
nection. Your ISP will
provide you with a
username and pass-
word. Select Dynamic
PPPoE to obtain an IP
address automatically
for your PPPoE con-
nection. Select Static
PPPoE to use a static
IP address for your
PPPoE connection.
Please be sure to
remove any
existing
PPPoE client
software
installed on your
computers.