Filter
Top Products
66D-Link DIR-457 User Manual
Section 5 - WEB Configuration
Time and Date
Select the Time Zone from the drop-down
menu.
Check the box to enable Daylight Saving
time.
Click this button to set the device’s time
the same to local PC.
Check the box to enable the device to
automatically synchronize with a D-Link
NTP Server. NTP stands for Network Time
Protocol. NTP synchronizes computer
clock times in a network of computers.
This will only connect to a server on the
Internet, not a local server.
Select one of the D-Link NTP Servers
from the drop-down menu. The DIR-457
will then synchronize it’s clock to be the
same time as the D-Link Internet time
server. Click the Update Now button to
synchronize with the D-Link Internet time
server immediately.
To manually input the time, use the drop-
down menus to enter the values in these
elds for the Year, Month, Day, Hour,
Minute, and Second.
Time Zone:
Enable Daylight
Saving:
Sync your
Computer’s Time
Settings:
Automatic
Time and Date
Configuration:
NTP Server Used:
Set the Time and
Date Manually:
The Time Conguration option allows you to congure, update, and maintain the correct time on the internal system clock. From this
section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be congured to automatically adjust
the time when needed.
Click the Save Settings button at the top or bottom of the window to save
the Time and Date settings.