Filter
Top Products
6
1.3.2 Vigor2100VG
LED Status Explanation
on The Wireless LAN function is active.
WLAN
blinking Data packets are transmitted over Wireless LAN.
E-mail
blinking
When detecting one or more user-defined e-mails existing on
mail server.
orange A normal 10Mbps connection is through its corresponding port.
green
A normal 100Mbps connection is through its corresponding
port.
WAN
blinking Ethernet packets are transmitting.
Solid light when the handset of phone is picked up (off
hooked).
green
Blinking per 2 seconds when phone is connected through
VoIP.
VoIP
orange Solid light when phone call is via PSTN life line.
ACT (Activity) on The router is powered on and running properly.
orange A normal 10Mbps connection is through its corresponding port.
green
A normal 100Mbps connection is through its corresponding
port.
LAN
(P1, P2, P3, P4)
blinking Ethernet packets are transmitting.
Interface Description
PWR
Connect the included power adapter to the power outlet.
Line
Connect to the analog phone line for PSTN life line.
Phone
Connect to the analog phone for VoIP communication.
WAN
Connect the Cable/ADSL modem to access the Internet.
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking), press the hole and keep for more than 5 seconds. When the ACT
LED begins to blink rapidly, release the button. Then the router will restart
with the factory default configuration.
P1, P2, P3, P4
Connect to the local network devices.