Filter
Top Products
9
2.2 Configure Your Router via Quick Start Wizard
Introduction
The Quick Start Wizard is designed for you to easily set up your broadband
Internet access. You can directly access the Quick Start Wizard via Web
Configurator.
Configure Your Router via Quick Start Wizard
Open the web browser on a PC which is connected to the router and
then link to the gateway IP address of the router (the default setting is
192.168.1.1). Once your link (http://192.168.1.1) is successful, a pop-up
window will open to ask for username and password. Leave the default
null value and press OK to continue.
Step 1.
If you fail to access to the web configuration, please refer to “Trouble
Shooting” guide.
Step 2.
The Main Menu will pop out after completing previous step.