Filter
Top Products
Installation
1. Install Interactive WhiteBoard
z Wall mounted
Select proper wall location, and install hanger parts on the wall. Then hang the interactive
whiteboard. (Prior to installation, please install the tray). Refer to the Installation Diagram of
Interactive whiteboard.
z Bracket type installation( brackets are optional parts)
Assembly the brackets according to Bracket installation Diagram found with the brackets. Then hang
the interactive whiteboard. Refer to the Bracket Installation Diagram>.
2. Connecting the Interactive WhiteBoard
z Using the USB cable only; Connect it to USB port of PC, USB can supply the DC Power. The red
indicator lamp on the board input plate should light.
3．Install Battery in the Electronic Pen
Turn the rear cap of the electronic pen counter-clockwise to open it, load one AAA 1.5V battery according
to the following figure, then tighten the rear cap clockwise. Battery positive (+) is toward the back of the
pen.
PEN TIP
8