Filter
Top Products
6
5 Slide the spool guide onto the right side of the spool and press the
guide tightly against the side of the label roll, leaving no gap
between the roll and the spool. See Figure 6.
NOTE To ensure proper feeding of labels during printing, the label roll
must fit snugly against both sides of the label spool, with no gaps.
6 Insert the label spool into the left slot in the printer cover with the
labels extending from underneath the roll. See Figure 7.
7 Align the left edge of the label with the left edge of the label feed slot
and insert the label into the slot. See Figure 8.
The printer automatically feeds the label, stopping at the beginning of
the first label.
If the printer does not feed the labels, make sure the first label is fully
inserted and then press the form-feed button.
If the first label on the roll is not a full label, press the
form-feed button to eject the partial label.
8 Slide the label guide to the left until the label guide
aligns with the right edge of the label. See Figure 8.
Make sure that the label guide does not pinch
the label.
9 Repeat steps 3-8 to load labels on the right side of
the printer.
10 Carefully lower the top cover.
Figure 6
Figure 7
Figure 8
Align labels
ainst left edge
Slide label guide
against labels