Filter
Top Products
4
To print a label
1 Enter text to create a simple label.
2 Press .
3 Press the cutter button to cut the label.
4 Remove the paper backing from the label to expose
the adhesive, and then attach the label.
Using Your Label Maker with Your Computer
Connecting the Label Maker to your Computer
The label maker connects to your computer using the USB connection located on
the top of the label maker. You do not need to install additional software or drivers
to use the label maker with your computer.
To connect the label maker to your computer
1 Plug the USB cable into the USB port on the top of
the label maker. See Figure 8.
2 Plug the other end of the USB cable into an
available USB port on your computer.
Split
backing
Figure 7
Figure 8