Filter
Top Products
8
•
Temperature and Voltage.
• System Alert text message. (If Present)
Indicators:
The indicator icons are located to the left and right sides of the LCD
display screen. When they are active they are back-lit with LED lighting.
Instrumentation
• Turns Signal Direction Arrows – Located
at the top and to the left and right of the
LCD display screen. These indicators are
backlit with green LED’s and will flash
when the turns signals or hazards flashers
are activated.
•
H
i
g
h Beam Headli
g
ht Indicator –
Located below the left turns signal arrow.
This indicator is backlit with a blue LED
to indicate when the high beam has been
selected.
• Neutral Indicator – Located below the
right turn signal arrow. This indicator is
backlit with a green LED to indicate when
the transmission’s neutral switch circuit is
completed.
• Alert Condition Indicator – Located at
the bottom of the indicators on both sides
of the LCD display screen. When an
“event” or “fault” condition occurs, these
backlit indicators will alternately flash for
ten seconds then remain steady until the
condition has been cleared. A text
message of the Alert Condition can be
read in the odometer area of the display.
The fault will also be logged in the
systems error log.