Filter
Top Products
2
For more information visit us at:
www.eatonelectrical.ca
December 2004
Product Description
Rotary Disconnect Switches
Product Description
Non-fused
■
R & W frame,
30A – 80A,
non-fusible
600V AC , suitable for use in
equipment or machinery as a motor
disconnect.
■
Manual motor controller suitable for
motor disconnect,
horsepower and
Amp rated, load break rated, meeting
requirements of CSA C22.2 No 14 CEC
rule 28-602 (3) (b) and UL508 “suitable
for motor disconnect.” 10 kVA short
circuit rating when used in conjunction
with Class J fusing.
■
C, V, & S Frame,
30A - 1200A,
non-fusible, 600V AC, rated
250 V DC inclusive to 600A. Suitable
for use as motor or industrial con-
trol panel disconnects, horsepower
and Amp rated, load break rated,
meeting requirements of CSA C22.2
No 4 and UL98.
Fusible
■
30A - 800A fusible 600V AC,
C, V & F Frame
, rated 250 V DC
inclusive to 400A. Suitable for use
as motor or industrial control panel
disconnect, suitable for use as a
service entrance disconnect, horse-
power and Amp rated, load break
rated, meeting requirements of CSA
C22.2 No 4 and UL98.
Features, Benefits and Functions
■
Fusible and non-fusible
■
Rotary or toggle operation
(non-fused)
■
Motor disconnects available
approved to CEC rule
28-602(3)(b)
■
Base mounting or DIN rail mounting
■
Compact design to minimize panel
space requirements
■
Pistol type or selector type handles
for through-the-door operation.
■
Toggle type handle for internal
panel mounting
■
Variable depth – complete range of
shafts that can be cut for specific
enclosure depths
■
Clear ON and OFF indication.
■
Padlockable in the OFF position with
up to three padlocks.
■
Interlocked, defeatable handle avail-
able. Allows access by authorized
personnel in the ON position.
■
ON/OFF/TEST (3 position) handles
allow testing of the control circuit
auxiliaries without switching the
main contacts.
■
Optional N/O, N/C auxiliary contacts
available
■
Visible blade indication up to 200A
(non-fused C & V frames)
■
Line side shrouds standard on all
ratings for C, S, V & F frames
■
Load side finger shrouds standard
on non-fusible 30-100A C & V frame
and 30-60A fusible.
■
Optional shrouds available for
higher ratings of V, S & F frame
■
Terminal lugs standard for C & V
frame 30-100A non-fused and
30-60A fusible.
Standards and Certifications
R- W-Frames
■
UL 508
■
CSA C22.2 No 14
CEC rule 28-602(3)(b)
■
IEC 60-947-3
C-, V-, S-, F-Frames
■
UL 98
■
CSA C22.2 # 4
■
IEC 60-947-3
■
CE
Options and Accessories
■
Neutral modules.
■
Auxiliary contacts.
■
4th pole modules.
■
Protective earth modules.
C-Frame
Non-Fusible
C-Frame
Fusible
V-Frame
Non-Fusible
S-Frame
Non-Fusible
V-Frame
Fusible
R-Frame
Non-Fusible
W-Frame
Non-Fusible
F-Frame
Fusible
NOTE: Photo does not represent proportional sizing between frame types