Filter
Top Products
Intelligent Technologies (IT.) D77A I/O Module Products
MN05002001E
For more information visit: www.EatonElectrical.com 29
Installing the Module
The module is now ready for installation on the DIN rail.
1. The module must always be inserted perpendicular onto the DIN rail. Push the module straight back onto the DIN rail.
2. Depress the locking tab to secure the module to the DIN rail.
Figure 25: Lock DIN Rail Locking Tab
a) Locking Tab
b) Locking Tab Captured
3. Install the terminal strip on the front of the module.
4. Lock the terminal strip into place using the locking tabs.
Figure 26: Removable Terminal Locking Tab
CAUTION PRÉCAUTION PRECAUCIÓN
Do no “rock” the module onto the DIN rail.
The rocking action could damage the
module.
Ne « basculez » pas le module sur le rail DIN.
L’action de basculement pourrait
endommager le module.
No “meza” el módulo sobre el riel DIN. El
mecerlo podrá dañar el módulo.
Notice Avis Aviso
After the strip is installed, install
interconnects; see the IT. QCPort System
Install and Planning Guide (Publication No.
MN05001002E) for more information.
Après avoir installé la bande, installez les
interconnecteurs ; voyez le Guide de
planification et d’installation du système
bâbord IT. QCPort (publication no.
MN05001002E) pour plus d’information.
Después de instalada la banda, instale los
interconectadores, vea la Guía de
Planificación e Instalación del Sistema
QCPort del IT. ( Publicación No.
MN05001002E) para obtener más
información.
b
a
D77A-018
D77A-019
0
8
2
14
412
6
10